the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Dodge truck


Post ReplyPost New Topic
< Prev Topic Next Topic >
rtezino 
Member - Posts: 8
Member spacespace
Joined: June 16, 2002
Location: United States
Posted: April 21, 2004 at 5:22 PM / IP Logged  
Do anyone know how to wire a relay for the parking light output for a 2004 dodge truck.It needs - polarity for parking lights to work.Please tell me the pin out connections for the - polarity parking lights.Thanks for your help.
1kewlexpo 
Member - Posts: 33
Member spacespace
Joined: November 21, 2003
Posted: April 21, 2004 at 5:55 PM / IP Logged  

I used the WHITE/ gray (+) wire in the engine compartment.  It's the wiring harness by the firewall, close to the driver side fender, by the brake master cylinder. This will flash all of the parking lights for you.

John

auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: April 21, 2004 at 8:07 PM / IP Logged  
- trigger through a 330 ohm resistor. If your alarm only supplies a +12V then use the diagram below and place the resistor inline with the output.
2004 Dodge truck -- posted image.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer