95 maxima factory security

Home / the12volt's Install Bay / Car Security and Convenience / 95 maxima factory security (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rovingtek

Member - Posts: 7

Joined: December 16, 2002

Location: United States

Posted: April 29, 2004 at 11:13 AM / IP Logged

I want to install an aftermaket alarm system, but I was told that the factory sec sys has to be bypassed.

What's involved???

Thanks

Back to Top

eurotech

Member - Posts: 44

Joined: April 26, 2004

Location: United States

Posted: April 29, 2004 at 12:43 PM / IP Logged

If your just adding an alarm, there is nothing special that you have to do. the factory alarm arms with lock and disarms with unlock. So as long as you hook your power doorlocks up on the alarm...you should be fine!

Back to Top

rovingtek

Member - Posts: 7

Joined: December 16, 2002

Location: United States

Posted: April 29, 2004 at 12:54 PM / IP Logged

Thanks eurotech, but the problem is that I don't have the remotes and it seems to be armed now. Iwas told that it can be reset by unhooking the battery for a few and reconnecting, but every time the door gets unlocked it will arm again.

Back to Top

eurotech

Member - Posts: 44

Joined: April 26, 2004

Location: United States

Posted: April 30, 2004 at 1:10 PM / IP Logged

It arms everytime it unlocks? hmm....are you sure you are just dealing with the factory alarm? What happens when the alarm goes off? Does it disarm when you unlock the door with the key?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 maxima factory security

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.