the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Tilt sensor into shock circuit


Post ReplyPost New Topic
< Prev Topic Next Topic >
Pooreclipse 
Copper - Posts: 75
Copper spacespace
Joined: April 14, 2004
Posted: April 29, 2004 at 1:06 PM / IP Logged  

The DEI tilt sensor I've got has only one state, it will ground.

I want to tap into the "instant on" wire of my shock sensor harness.   My question is do I need a diode on the tilt sensor wire going into the shock sensor instant on wire?

Or do I need 2 diode, 1 on each wire?

I don't think I need any diodes at all?  Should be no problem if the sensor A getting grounded by sensor B?

eurotech 
Member - Posts: 44
Member spacespace
Joined: April 26, 2004
Location: United States
Posted: April 29, 2004 at 2:40 PM / IP Logged  

I dont think you want to hook it to your shock sensor harness.  What is the tilt sensor for?  There should be a negative triggered instant wire on your alarm.  Hook it into that.  If you have a DEI alarm, the wire should be grey.  If not, what alarm do you have?

Pooreclipse 
Copper - Posts: 75
Copper spacespace
Joined: April 14, 2004
Posted: April 29, 2004 at 3:36 PM / IP Logged  

Tilt sensor is to detect if someone jack up the car (even gently)

I have the autopage, but the tilt sensor is DEI..

The shock sensor that comes with the autopage is like other alarms... one wire you ground is pre-warn.. another wire you ground is instant on.  going into the alarm from the 2 stage stock sensor

So I should be able to just tee the tilt snsor output to the instant on wire right?>

Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: April 29, 2004 at 4:32 PM / IP Logged  
You need to install a diode to ensure that there is no feed-back from the other sensor.
Regards
EVIL Teken . . .
securinu 
Silver - Posts: 772
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 15, 2002
Location: United States
Posted: May 03, 2004 at 5:41 PM / IP Logged  
why are you hooking it up to the shock there is a instant trigger for trunk or hood on the alarm. Or instant start input would really freak them out. I did this to a guys car that had his rims jacked 2x in a month
Joe O'Byrne
Owner / Installer

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, October 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer