Peugeot 306 1997 alarm wiring diagram req

Home / the12volt's Install Bay / Car Security and Convenience / Peugeot 306 1997 alarm wiring diagram req (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Nick-a

Member - Posts: 5

Joined: April 22, 2004

Location: United Kingdom

Posted: May 04, 2004 at 11:58 AM / IP Logged

Many thanks!

Nick

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: May 04, 2004 at 6:59 PM / IP Logged

Here is what I could find for a 96.

12volts

Starter blue ignition harness

Ignition yellow ignition harness " Fuel cut pump is white wire at a double relay module attached to the firewall on the n/side. Module is brown."

Power Lock orange or white - ctrl mod behind rear seat Extend to 3 second lock pulse to deadlock

Power Unlock violet or lt brown - ctrl mod behind rear seat Extend to 3 second lock pulse to deadlock

Parking Lights+ red & green at the steering column

Door Trigger grey or yellow - loom driver side A pillar

Trunk/Hatch Pin white at the bootlight

Tachometer brown pin 4 yel conn. top of the dash

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Nick-a

Member - Posts: 5

Joined: April 22, 2004

Location: United Kingdom

Posted: May 04, 2004 at 7:21 PM / IP Logged

Cheers for that, should make life a bit easier.

Regards,

Nick

Nick-a

Member - Posts: 5

Joined: April 22, 2004

Location: United Kingdom

Posted: May 13, 2004 at 11:21 AM / IP Logged

Hi,

Can anyone tell me what door locking system it has (to fit a clifford Avang Guard, 5) everythings done apart from the door locks and brake light now!

Regards,

Nick

laren5

Copper - Posts: 57

Joined: June 10, 2003

Location: Aruba

Posted: May 14, 2004 at 5:51 AM / IP Logged

Type B: negative

Good luck

Clifford Alarms

Nick-a

Member - Posts: 5

Joined: April 22, 2004

Location: United Kingdom

Posted: May 21, 2004 at 2:57 PM / IP Logged

Right...done everything now apart from the remote start, it has a problem. If the cars running and i activate remote start, and turn it off, it waits a second or two and restarts the car without the key etc, but wont do it without the key having been in the ignition when its activated. I can start the car using the manual elements of cliffnet too, but the start command itself does nothing. It can read the RPM. battery etc everything! Any ideas on what to try?

Cheers Guys,

Nick

audioconnection

Member - Posts: 45

Joined: June 13, 2003

Location: United Kingdom

Posted: May 25, 2004 at 11:01 PM / IP Logged

i believe you have to bypass the safety feature of the clifford. it has this to stop people starting cars with them in gear. and the pug prob doesnt have a parking lock if its an auto.

if you need local help, call PDS in Fenton, Staffs @ 01782-744556

or paul @ source sounds in sheffield

remember...Friends Dont let friends Install, Take it to a pro..

Search for other posts by audioconnection

Nick-a

Member - Posts: 5

Joined: April 22, 2004

Location: United Kingdom

Posted: May 26, 2004 at 10:05 AM / IP Logged

audioconnection wrote:

i believe you have to bypass the safety feature of the clifford. it has this to stop people starting cars with them in gear. and the pug prob doesnt have a parking lock if its an auto.

All sorted now :)

Ta,

Nick

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Peugeot 306 1997 alarm wiring diagram req

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.