Downfire question

Home / the12volt's Install Bay / Car Audio / Downfire question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

enigma07

Member - Posts: 2

Joined: May 05, 2004

Location: United States

Posted: May 05, 2004 at 1:04 AM / IP Logged

When building an enclosure for a downfiring sub, how is it you would come across the volume you would need. I've been told you just subtract the basket displacement from the sealed volume but i know there must be more than that. Any posts would be appreciated, thank you.

quinny

Member - Posts: 12

Joined: May 04, 2004

Location: Bahamas

Posted: May 05, 2004 at 2:15 AM / IP Logged

go with what u have been told you can always add timber blocks to the inside of the box to make the sound would like

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 05, 2004 at 3:29 AM / IP Logged

it depends if the down fire means with the basket inside of the box of out side of the box. if out side you need to take into accountance the basket displacement and the cone displacement.

Quad L Handyman services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Downfire question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.