How to run wires from door....?

How can I run wires from the driver side door to inside car on a 98 VW GTI VR6. I'm trying to get to the power window wires in the door for my window module but I cant find an easy way through..

There is no easy way just run it thru the boot. What you want to do is remove the door panel and the panel inside the car where the boot ends .Go to your local hardware stores electrical section and ask for the goop that is used to pull wire thru conduit. I can’t remember the name but they will know what you’re talking about. Trust me this stuff makes it a lot easier. Then grease up the wire and boot and try to fish the wire thru the boot. Try to wiggle the boot some times that helps. Hope this helps

What do I do about the molex plug at the door jam?

My car does have the auto roll up when the lock is held but wont extending the lock pulse damage the motor if the window is already up. Its basically like holding the window up button when the window is already up. The lights dim meaning and it causes a current draw that way. I was going to use the module cause it senses that current draw and stops immediately.