the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Retained Accessory


Post ReplyPost New Topic
< Prev Topic Next Topic >
hawkinstaller02 
Member - Posts: 44
Member spacespace
Joined: May 13, 2004
Location: United States
Posted: May 18, 2004 at 12:38 PM / IP Logged  

anyone know how to add a retained acc. for radio to remain on until the dor opens????????????

Did that work???????
-Installer-
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: May 18, 2004 at 1:57 PM / IP Logged  
If you wish to keep the radio (or any other device that is powered by an accessory circuit) on until a door is opened, you can do so by creating a latch when the accessory is turned on with the relay shown below on the left, then breaking ground to the latch when a door is opened as shown with the relay below on the right. While this will keep the radio on, the entire accessory circuit will see 12V+ until a door is opened with the key in the off position.(the12volt.com @ relay section)
Retained Accessory -- posted image.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
WillTS 
Copper - Posts: 65
Copper spacespace
Joined: May 07, 2004
Location: United States
Posted: May 18, 2004 at 5:38 PM / IP Logged  
Would you be able to use a diode between the radio and the rest of the vehicle wiring to keep the juce from flowing to the rest of the accessories?
Will

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer