Ground interrupt

Home / the12volt's Install Bay / Relays / Ground interrupt (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

hillbilly71

Member - Posts: 1

Joined: May 18, 2004

Location: United States

Posted: May 18, 2004 at 10:28 PM / IP Logged

I am looking to momentarily interrupt a ground wire by using a relay with a ground input. It doesn't have to have a ground input to the relay but it would make it easier.

Back to Top

bxscig

Copper - Posts: 41

Joined: April 05, 2004

Location: United States

Posted: May 19, 2004 at 1:21 PM / IP Logged

Use a relay and connect the ground u want to disconnect to that relay's NC pin and then trigger the relay pin 85 with the ground while 86 is +12Vs. pin 30 would be the ground u want it connected to. that will break it as long as the relay is activated.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ground interrupt

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.