viper arms itself

Home / the12volt's Install Bay / Car Security and Convenience / viper arms itself (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: September 01, 2002 at 5:53 PM / IP Logged

Ok this is wierd but the viper 500 that has been installed for like 3 months now decides to arm itself whenever it wants. Now I checked all my door triggers,and they are working as they should all my zones are connected. This arms wether the door is open or not by itself, and it is not passive arming because it does this way after it would have passive ly armed. It also continues to chirp when pressing disarm even though it already has disarmed. I dought the brain is bad i have seen a lot of vipers and not any were faulty.

Back to Top

Search for other posts by mobiletoys2002

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 01, 2002 at 8:05 PM / IP Logged

Try this for starters..... take the battery out of all remote controls that control the Viper system. If the problem goes away then it's a loose connection on the remote control. I've seen this happen on a few RS units where it would remote start the car without pressing the button. Sometimes the button is pushed too hard and does not spring back into place.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: September 07, 2002 at 10:02 PM / IP Logged

ok Velocity that did not work now what????? i hope it is not the brain i dont think but im lost now verry lost I dont know what to check .

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 08, 2002 at 8:48 AM / IP Logged

It sounds to me like a faulty CPU. I would return it for a new CPU and see if the pronlem persists with the new one. If so you have a snagg in one of your trigger points.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: September 08, 2002 at 11:03 AM / IP Logged

Thanks I guess it is time to take the brain out. viper arms itself -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper arms itself

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.