Multiple LED's with an Audiovox APS-996a

Home / the12volt's Install Bay / Car Security and Convenience / Multiple LED's with an Audiovox APS-996a (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Cptbrainiac

Member - Posts: 21

Joined: April 27, 2004

Location: United States

Posted: May 21, 2004 at 10:47 AM / IP Logged

Hi,

Was wondering if anyone had any experience installing multiple LED's with a 996a.

I'd like to be able to add two (or four) additional LED's to my 996a (for the doors). These would be simple flush mount, flat top LED's; similar to the DEI 622T.

Any help would be appreicated.

Thanks.

Bill

Back to Top

WillTS

Copper - Posts: 65

Joined: May 07, 2004

Location: United States

Posted: May 21, 2004 at 11:19 AM / IP Logged

Never done it on an alarm, but on computers I have messed around with them. It should be no problem as long as you wire them in series. And they hardly use any power, so four of them should be no problem.

Will Just my $00.02

97 Chevy K1500 5.7L w/ Clifford Matrix RS2

BTW I am not a professional(well at procrastination maybe)

Be Gentle, I'm new to this :-)

Back to Top

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: May 21, 2004 at 3:33 PM / IP Logged

Yeah, just be sure that they are wired in series. I've seen ppl put up to 8 leds wired in series. But be careful, if you dont wire them in series you can fry the led output on your alarm brain.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Multiple LED's with an Audiovox APS-996a

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.