turning radio on with extra output

i have on the way the Ungo SR5000 and i am adding the DEI 530T and also a trunk selinoid. i believe the alarm has to outputs....what would i need to where i could push a button and my stereo system would come on and stay on?

i think youve used it up already. one for the 530t and one for trunk, isnt it?Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

ok....well incase i change my mind on the trunk...how would i go about it?

you need a channel that has a latched trigger. i know DEI product has this option w/ a channel thats program to latch and reset when ignition on.Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

What is going to turn the radio off before it kills the battery? If you accidentally push the button in your pocket and the radio turns on you'll drain your battery. Does the vehicle have the RAP (retained accessory power) feature? What is the vehicle your installing into?

its going into a 1998 Mitsubishi Eclipse Spyder. it was just a wow factor i wanted to get...my friend had it on his clifford alarm to where he could turn it on..i was just considering it

You would hook a relay up to the output on the alarm, and then have it power the switched power that goes to your radio. Something like this. 86 and 87   12v+ Constant 30           Switched Power Supply to radio 85           - neg trigger from alarm Now that would be if it has a latched trigger, if not you would need to add the latching part with some relays. Good info to be had HEREWill              Just my $00.02

97 Chevy K1500 5.7L w/ Clifford Matrix RS2

BTW I am not a professional(well at procrastination maybe)

Be Gentle, I'm new to this :-)