the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3rd gen cavaliers, alarm install


Post ReplyPost New Topic
< Prev Topic Next Topic >
ohio420jb 
Member - Posts: 26
Member spacespace
Joined: May 20, 2004
Location: United States
Posted: May 22, 2004 at 12:50 PM / IP Logged  
ok ill keep that in mind thanks man i appreciate it, one more thing, is the diodes for the dome light the only diodes ill need or do i need them else where, cf says i need diodes for the dome light, and thats it, the tharnes and what came in the box, plus the diodes will do everything, is this correct?
godsegoizhuge 
Copper - Posts: 214
Copper spacespace
Joined: December 12, 2002
Location: United States
Posted: May 22, 2004 at 1:00 PM / IP Logged  
yeppers, 2-1 amp diodes is all you need to cover the door triggers. If your going to do a trunk release then i'd get a relay to cover that, also if i were you i'd goto circuit city, best buy or a local car stereo shop to get yourself a 451m. That'll make it easier to do the doorlocks, becuz i think it'll need relays for it. I know it might say not to use relay's but i use them anyways just so if something happens it wont fry out the door lock part of the alarm.
ohio420jb 
Member - Posts: 26
Member spacespace
Joined: May 20, 2004
Location: United States
Posted: May 22, 2004 at 1:18 PM / IP Logged  
they said i wont need relays or diodes for the door locks, just to get the dome light to function, on the door locks they said i just needed to tie into 2 wires
ohio420jb 
Member - Posts: 26
Member spacespace
Joined: May 20, 2004
Location: United States
Posted: May 22, 2004 at 1:19 PM / IP Logged  
the only relay on this alarm that ive seen is on the t-harness for the column
ohio420jb 
Member - Posts: 26
Member spacespace
Joined: May 20, 2004
Location: United States
Posted: May 22, 2004 at 6:00 PM / IP Logged  
i can use a regular volt meter for this also correct?
godsegoizhuge 
Copper - Posts: 214
Copper spacespace
Joined: December 12, 2002
Location: United States
Posted: May 23, 2004 at 7:44 PM / IP Logged  
yeppers or even a dig. multimeter...anything BUT a test light. They suck and will harm the computer.
ohio420jb 
Member - Posts: 26
Member spacespace
Joined: May 20, 2004
Location: United States
Posted: May 23, 2004 at 10:42 PM / IP Logged  
im confused on the doors though, dunno why do i just splice into or cut completely to have it sorta run through,
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: May 24, 2004 at 12:06 PM / IP Logged  
https://www.the12volt.com/12voltimages/negdoortrigs.gif
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
ohio420jb 
Member - Posts: 26
Member spacespace
Joined: May 20, 2004
Location: United States
Posted: May 24, 2004 at 7:53 PM / IP Logged  
ive got most of it done, the locks work, but the trigger isnt hooked up yet, i wired into the lights but they arent working, alarm works though, just going by the sensors, is the alarm supposed to beep about 6-8 times real fast when i turn the key on?
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer