how to wire dual voice?

Home / the12volt's Install Bay / Car Audio / how to wire dual voice? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 27, 2004 at 12:19 PM / IP Logged

depending on what fuse you have in the amp, you may want to put a 40a fuse in your power line instead of a 30a

Quad L Handyman services

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: May 27, 2004 at 12:35 PM / IP Logged

i can't seem to find a 40a every auto shop store i went to only had up to 30a blade fuse.

auto zone

kragen

98+ store

99+ only store

and if its a 40a its a really big fat one that dont fit into my fuse holder.

SO i'm not sure.. i mean i can take one from my amp but my amp wont work then ahhaha

so i'm not sure

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 27, 2004 at 1:57 PM / IP Logged

what fuse or fuses are currently in your amp? you may need to upgrade your fuse holder if you can't find a fuse.

Quad L Handyman services

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: May 27, 2004 at 2:06 PM / IP Logged

the fuses that are on the back of my are (2) 40 amp orange blade fuse

the fuse under my hood that is about 35" away from my battery terminal

is a green 30a fuse blade.

i'm kidding about my fuse holder being 35" away from battery terminal its really 48" away

nah i'm kidding again ahha its only 17"

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 27, 2004 at 2:23 PM / IP Logged

well with two 40a fuses on the amp the company is suggesting that the amp can pull up to 80a which would most likely require a different fuse holder due to the fact that maxi fuses don't go up to any where near the 80a range, sorry i mis-lead you with a 40a fuse earlier i was looking at the specs for the wrong amp.

Quad L Handyman services

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: May 27, 2004 at 2:27 PM / IP Logged

Yeah so my best chance is to cut the current fuse holder and just attatch a agu fuse holder with a 60a amp agu fuse. and everything will most likely work fine?

Back to Top

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 27, 2004 at 2:31 PM / IP Logged

yes that will work, i would suggest an 80a agu fuse to coinside with the two 40a maxi on your amp.

Quad L Handyman services

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: May 27, 2004 at 2:36 PM / IP Logged

ok sweet and dandy just like kAndy! thanx!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to wire dual voice?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.