'01 Stratus R/T w/Infiniti

Home / the12volt's Install Bay / Car Audio / '01 Stratus R/T w/Infiniti (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

TimmyV

Member - Posts: 10

Joined: July 16, 2002

Location: United States

Posted: September 02, 2002 at 11:53 PM / IP Logged

I have a couple of questions in regards to this vehicle

1. Amplifier location

2. Color codes if you know them

3. Lastly, I only had a brief moment to look at the vehicle, but the rears had no visible wiring running to them, I am sure this is not a first for all, but it is for me

Thanks

Always use your meter:)

teampimp

Member - Posts: 19

Joined: August 30, 2002

Location: Canada

Posted: September 03, 2002 at 2:52 AM / IP Logged

1. In the trunk or under your seat, but an amp needs atleast 2" inches of breathing space so they don't overheat.

2.You can order plugins which are color coded to match you new decks wires and it plugs into the factory harness.

checkout "bestkits.com" or "

3. If it turns out the the original wires are missing, you will have to run new wires under the interior or along the door jambs. It's little tricky but not too hard by yourself.

hope I could help.

teampimp

Member - Posts: 19

Joined: August 30, 2002

Location: Canada

Posted: September 03, 2002 at 2:54 AM / IP Logged

oh yeah another thing check out the "Metra kit" application guide on this site for harnesses.

TimmyV

Member - Posts: 10

Joined: July 16, 2002

Location: United States

Posted: September 03, 2002 at 12:08 PM / IP Logged

sorry, i was not very clear in my request...i am looking for the factory infiniti amplifier and its wire codes in order to bypass or integrate

Always use your meter:)

zorro33

Member - Posts: 5

Joined: December 04, 2002

Location: United States

Posted: December 06, 2002 at 6:19 PM / IP Logged

i trt to find the same for 97 chrysler town and country my new jensen has no sound

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: December 08, 2002 at 4:08 PM / IP Logged

You don't need any special bypass pieces to get the factory Infinity---yes, Infiniy with a Y---to work properly.

Just be sure to attach the amp turn-on wire from the aftermarket radio to the power antenna wire in the harness, and the amp will turn on. If you're a professional, this is something you should do on every car anyway.

Installer95

Member - Posts: 2

Joined: December 09, 2002

Location: United States

Posted: December 09, 2002 at 7:52 AM / IP Logged

No, you do need to bypass. Or Integrate the amp. Remember the Stratus R/T, and Sebring Coupe are Mitsubishi Eclipses in disguise. They use a Din cable from the radio to AMP.

http://www.eclipseforums.org

Check out this web site. This a forum for the 3rd Gen Eclipses which is the Baseline for the Stratus and the Sebring Coupe.

You essentially have two choices. You can run new wire to the Amp and rewire the amp plug or can use these.

http://www.audio-warehouse.com/detail.asp?mdl=HRC-MIT

http://www.sounddomain.com/sku/PERMITAH

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

'01 Stratus R/T w/Infiniti

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.