spacer spacer spacer spacer

2004 Pontiac Vibe Alarm Wiring Diagram and VSS

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: June 05, 2004
Location: United States
Posted: June 05, 2004 at 9:57 PM / IP Logged  
i need a wiring diagram for a pontiac vibe i want to install cruise control to it. i also would like to know the color of the wire for the VSS thanks any help would be appreciated.
Copper - Posts: 221
Copper spacespace
Joined: March 04, 2004
Location: United States
Posted: June 09, 2004 at 10:10 AM / IP Logged  
12voltswhite (25A) & black (15A) + ignition harness
Starterred + ignition harness
Second StarterN/A
IgnitionBLACK/ white + ignition harness
Second IgnitionBLACK / YELLOW + ignition harness
Third IgnitionN/A
Accessoryblue/red + ignition harness
Second AccessoryN/A
Keysenseblue/black - ignition harness
Notes: Using the status output to trigger this wire during remote start will disarm the factory alarm without unlocking the doors.
Power Lockgreen - driver kick, blue 12 pin plug
Notes: Meter these wires while turning the key in the driver door key cylinder.
Power Unlockblue / YELLOW - driver kick, blue 12 pin plug
Notes: Meter these wires while turning the key in the driver door key cylinder. Unlock requires a double pulse.
Can also use the passenger door key cylinder wire for unlock, which only requires a single pulse. It is blue/black (-) in the passenger kick in a blue 12 pin plug.
Lock Motorblue 5widriver kick, blue 12 pin plug
Unlock Motorred 5widriver kick, blue 12 pin plug
Parking Lights+green + driver kick, harness to rear
Parking Lights-GREEN / WHITE - headlight switch
Hazardsyellow/black - flasher relay left of fuse box
Turn Signal(L)GREEN/ black + flasher relay left of fuse box
Turn Signal(R)GREEN/ YELLOW + flasher relay left of fuse box
Reverse LightRED / black + front of fuse box, 10 pin plug
Door TriggerRED / white - interior light switch on dash
Dome Supervisioncomes on with unlock
Trunk/Hatch Pincommon with door trigger
Hood PinN/A
Trunk/Hatch Releaseblue/white - release switch on dash
Power Sliding DoorN/A
Factory Alarm Armarms with lock
Factory Alarm Disarmdisarms with unlock
Disarm No Unlockuse key sense wire
Tachometerblack ac pin 5, conn. E6 at ECM
Notes: The ECM (Engine Control Module) is behind the glove box. Connector E6 is the plug on the right.
Wait to startN/A
Brake WireGREEN / WHITE + brake pedal switch
Parking BrakeRED / black - parking brake switch
Horn TriggerGREEN/ YELLOW - steering column
Memory Seat 1N/A
Memory Seat 2N/A
Memory Seat 3N/A
Immobilizer Bypass Module:Required: NoType: N/APart #: N/A
Notes: N/A
This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Monday, March 4, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer