1995 GMC Sierra 1500

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1995 GMC Sierra 1500 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

klallisonjr

Member - Posts: 1

Joined: September 05, 2002

Location: United States

Posted: September 05, 2002 at 2:48 AM / IP Logged

During installation of a brake controller for a trailer, I managed to damage something??? causing the shift lever for the transmission to lock up. I have no brake lights at all now. All fuses are intact. Access to the wiring is difficult as there is virtually no "extra" length to pull down. Where is the actual brake light switch? Could I have pulled a connector loose there? I do know that if the wiring to the switch is interrupted, the release for the transmission lever does not function. Maybe a wiring diagram would help? Thanks.

Keith<br><br>

Knoxville, TN

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 05, 2002 at 4:58 AM / IP Logged

Did you check the bulbs to see if you may have blown the bulbs if the fuses are fine ??

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

lalur

Member - Posts: 27

Joined: September 06, 2002

Location: United States

Posted: September 06, 2002 at 7:22 PM / IP Logged

did u look at were the brake wires and brake lights ccome out of the brake pedal sometimes this gets knocked loose and most atoumatics want shift out of gear without the brake being pushed in

any help ask

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 GMC Sierra 1500

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.