installing viewing window

Home / the12volt's Install Bay / Car Audio / installing viewing window (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

insanity44

Member - Posts: 8

Joined: June 01, 2004

Location: United States

Posted: June 08, 2004 at 12:08 AM / IP Logged

ok guys...i am wanting to put a viewing window on my box. i want to know the best way to have a plexiglass viewing window on it.. does it matter how thick the plexiglass is?and how should i put it on the box and how should it be secured

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: June 08, 2004 at 12:45 AM / IP Logged

you need to cut and router the edges of the cut to accomidate the window. i would suggest at least a 3/8" plexi most likely you will need thicker depending on the sub. you also need to seal the window when you put it on with sealant and screws about ever 1.5".

Quad L Handyman services

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

installing viewing window

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.