1997 lexus ES 300

Home / the12volt's Install Bay / Car Security and Convenience / 1997 lexus ES 300 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

drtoofast

Member - Posts: 12

Joined: June 01, 2004

Location: United States

Posted: June 09, 2004 at 7:06 PM / IP Logged

I recently installed a Valet 554r on my wife 1997 Lexus ES 300 Every thing seems to be working ok but after it autostarts the Radio and heating/AC display flash from a dim to a bright. However if I un-hook the parking light flash it dose not do it.

I used the white wire in the primary harness switched to Positive [ + ] and tied it into a GREEN/ orange wire that comes off the bottom of the fuse block facing you as you look at it. Dose anybody know am I tied into the wrong wire or do I need a negative pulse on a different wire? Or maybe a relay ? I am at a loss, but I do know something is not hooked up right but I have no information to bale me out…

Thanks for your help guys

If it too fast your Too old...

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: June 10, 2004 at 11:40 AM / IP Logged

According to the diagram I see its a positive system and the wire your looking for is green.

Lexus

ES 300

1995-1997

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #1:	BLACK/ ORANGE	IGNITION SWITCH HARNESS
Ignition #2:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	PINK/BLUE	IGNITION SWITCH HARNESS
Brake Light:	GREEN / WHITE (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	BLACK	AT ENGINE CONTROL MODULE *
Parking Lights:	GREEN (+)	# PIN CONNECTOR AT FUSE BLOCK
Headlights:	RED / YELLOW (-)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:	RED / BLUE (-)	IN DRIVER KICK PANEL
OEM Alarm Arm:	YELLOW/RED (-)	# PIN CONNECTOR
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Engine Control Module Located Behind Glove Box. BLACK Tach Wire Also Found In 10 Pin Connector At Fuse Block In Driver Kick Panel.

Lexus

ES 300

1995-1997

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ RED & WHITE	IGNITION SWITCH HARNESS
Starter Kill:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLACK/ ORANGE	IGNITION SWITCH HARNESS
Dome Lights/Superv:	GREEN/ RED (-)	6 PIN CONNECTOR AT FUSE BLOCK **
OEM Horn:	GREEN/ BLACK (-)	STEERING COLUMN HARNESS
Power Lock:	PINK/BLACK	# PIN BLUE CONN. IN DR. KICK ***
Power Unlock:	GREEN	I# PIN BLUE CONN. IN DR. KICK ***
Trunk Release:	BLUE (+)	# PIN CONN. IN DR. KICK PANEL ****
Alarm Input Wire:	GREEN/ RED (-)	6 PIN CONNECTOR AT FUSE BLOCK **
Notes:	Fuse Block Located In Driver Kick Panel. RED / WHITE (-) At This Same Location Can Also Be Used. * See Note #209 - Toyota Door Lock Diagram. **** See Note #232 Positive Pulse Door Lock Diagram.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1997 lexus ES 300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.