installing immobiliser in 94 ford transit

Home / the12volt's Install Bay / Car Security and Convenience / installing immobiliser in 94 ford transit (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

transitman

Member - Posts: 3

Joined: June 09, 2004

Location: United Kingdom

Posted: June 09, 2004 at 11:37 PM / IP Logged

can anyone help?

"2nd isolating circuit (18A relay used for this circuit). This circuit must

be live during cranking and engine running."

what wire can i use for this connector and where to find it?

cheers

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 10, 2004 at 8:57 AM / IP Logged

not sure i follow you. are you installing a starter disable????

if so, use a meter to find the starter wire (will show 12v when the key is cranking the motor)

take and cut the wire in two.

wire a relay as follows:

86 12v

30 key side of starter wire

87a other side of starter wire

85 neg output from alarm when armed.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

jfk51502003

Copper - Posts: 221

Joined: March 04, 2004

Location: United States

Posted: June 10, 2004 at 10:33 AM / IP Logged

"2nd isolating circuit (18A relay used for this circuit). This circuit must
be live during cranking and engine running."...it sounds like you need to get ignition wire ...power when on and cranking...right...?

transitman

Member - Posts: 3

Joined: June 09, 2004

Location: United Kingdom

Posted: June 10, 2004 at 3:27 PM / IP Logged

sorted now use the wire that goes to the cold start solonoide

thanke for the help

transitman

Member - Posts: 3

Joined: June 09, 2004

Location: United Kingdom

Posted: June 10, 2004 at 3:28 PM / IP Logged

sorted now use the wire that goes to the cold start solonoide

thanks for the help

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

installing immobiliser in 94 ford transit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.