Compustar CM3000, Status Output, ’00 Jeep

Home / the12volt's Install Bay / Car Security and Convenience / Compustar CM3000, Status Output, ’00 Jeep (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

hbay785

Member - Posts: 5

Joined: June 10, 2004

Location: United States

Posted: June 10, 2004 at 7:01 PM / IP Logged

I installed a CM3000 2wfm-as alarm system on a '00 jeep cher and do not know where to connect the status output wire. Also how do you get the remote pager to work with the alarm does it have to be programed or could the antenna be bad

Tye

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 11, 2004 at 7:24 AM / IP Logged

what does the install manual say about that wire??

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

hbay785

Member - Posts: 5

Joined: June 10, 2004

Location: United States

Posted: June 11, 2004 at 7:35 AM / IP Logged

The manual says " (-) Status output CN2 this comes in one second before ignition on and continues until one second after ignition off."

I was guessing it has to do with bypassing a imoblizer but im not sure

Tye

deviousjoker

Copper - Posts: 102

Joined: April 22, 2004

Location: United States

Posted: June 11, 2004 at 2:19 PM / IP Logged

if you don't have the grey key on your jeep then don't worry about it.

First Class MECP Installer

hbay785

Member - Posts: 5

Joined: June 10, 2004

Location: United States

Posted: June 11, 2004 at 5:44 PM / IP Logged

so the status output wire is for sure used for bypassing the imobilizer?

Tye

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar CM3000, Status Output, ’00 Jeep

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.