the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

97 mercedes e320 remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
topdeez 
Member - Posts: 11
Member spacespace
Joined: May 18, 2004
Location: United States
Posted: June 11, 2004 at 3:15 PM / IP Logged  
just installed viper 550esp onto my 97 mercedes e320...i bought the 555u and hooked it up as stated. red wire to 12v, blue to status...key in system and antenna around ingnition....it does not work.. please help. i also located the factory transponder box . the antenna from ignition is plugged in and also another two wire plug..then there is the main harness with about 10 wires.....now for the first transponder ring plug..ther is a black wire and the other wire is an unprotected ground wire .can i connect the antenna wire from the 555u to this..and how?  how do i get my remote start to work...this is my first alarm. everything went well except for this problem...please help
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 11, 2004 at 3:45 PM / IP Logged  
i dont show that car as having an immbolizer....
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 11, 2004 at 3:47 PM / IP Logged  
if you put the key in the ign. and try to remote start, does it start?????
do you have all of the ign. wires hooked up???
Ignition 12 volts PINK/GREEN IGNITION SWITCH HARNESS *
Ignition #2 PINK/GREEN IGNITION SWITCH HARNESS
Accessory PINK/BLUE IGNITION SWITCH HARNESS
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: June 11, 2004 at 4:06 PM / IP Logged  
1.does your RS attempt to start?
2.if yes(1), check the wire David stated above and check for tach.
3.if no(1), check for shut down pins. check the BLACK/ white wire on harness w/ the tach/hood wires are at and ground that wire so ur RS can start.
note***Vehicles with the switchblade key have an immobilizer system that needs to be bypassed when adding remote start. Use DEI part number 555U. Vehicles with the Smart Key, a bypass is not available at this time.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
topdeez 
Member - Posts: 11
Member spacespace
Joined: May 18, 2004
Location: United States
Posted: June 12, 2004 at 5:29 PM / IP Logged  
all ignition wires are hooked up. yes when  i put the key in the ignition and remote start, it works.....yes it attempts to start, tach is hooked up...the problem seems to be the signal not getting to transponder properly with the 555u unit...
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 12, 2004 at 8:45 PM / IP Logged  
try to reprogram the bypass unit.....
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
topdeez 
Member - Posts: 11
Member spacespace
Joined: May 18, 2004
Location: United States
Posted: June 13, 2004 at 11:46 AM / IP Logged  
got it...what happen was the antenna ring from the 555u is bigger in diameter of the ingition ring. i had to wrap it arroung tightly then twist the excess and tuck it with the rest of the wire close to the transponder's antenna.
thanks people.
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: June 13, 2004 at 2:08 PM / IP Logged  
This is on another note:  do you have any trouble with the info. center in the instrument cluster saying "lamp defective".  I installed a Clifford r.s. in my dad's benz and I'm having a problem where it comes on when the car is r.s.  The error doesn't come up when started with the key.  His doesn't have the immobilizer like yours either.
topdeez 
Member - Posts: 11
Member spacespace
Joined: May 18, 2004
Location: United States
Posted: June 13, 2004 at 3:39 PM / IP Logged  

good question...i noticed that "lamp defective" has been coming on with the remote start. the bulb that i noticed that was blown was in the dash cluster...the message does not come one when i start the car with the key and put the lights on like it supposed to... very strange..any ways when i get some time i will change the bulb and check whether it blows again....

draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: June 13, 2004 at 11:28 PM / IP Logged  
that problem may be from not powering up all of the ign. wires......
double check to see that all of the wires are powered up....
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, August 13, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer