ultrastart starter disable

do you know if the clucth switch is power or ground supply

sorry should have ask you that first . if you step on the clucth and is a neg out put .then you need to used the yellow wire to the starter wire on the vec. then need to used the white wire from the ultra starter to bypass the clucth. remember you need to move the jump pin on the module to starter only . the instruction manual you got

with the remote will show you.

on hooking up the relay , go under basics for relays . it will show you how to hooked up the relay.

you needs to use the white wire from the uktra start as the trigger.

also you should know that , with the ultra starter for the manual you needs to hooked up the door trigger wire.

in order for the module to work properly. the green is the neg door trigger or the purple is the positive.