the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

camaro 96 power lock

Home / the12volt's Install Bay / Car Security and Convenience / camaro 96 power lock (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
moshe 
Member - Posts: 26
Member spacespace
Joined: September 07, 2002
Location: Canada
Posted: September 07, 2002 at 8:17 AM / IP Logged  

need info to install after market keyless to this car

moshe 
Member - Posts: 26
Member spacespace
Joined: September 07, 2002
Location: Canada
Posted: September 07, 2002 at 8:36 AM / IP Logged  
camaro 96 power lock -- posted image.can some one please help me?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 07, 2002 at 8:37 AM / IP Logged  

|              12V|red                 |+  |ignition harness            |

|          STARTER|yellow              |+  |ignition harness            |
|         IGNITION|pink                |+  |ignition harness            |
|        ACCESSORY|orange  must enable |+  |right of dr.kick panel      |
|       POWER LOCK|RED / black           |-  |BCM in pass kick            |
|     POWER UNLOCK|tan & gray/black *2 |5wi|BCM in pass kick            |
|       LOCK MOTOR|gray                |   |BCM in pass kick            |
|     UNLOCK MOTOR|tan                 |   |BCM in pass kick            |
|    DISARM DEFEAT|gray/black          |   |BCM in pass kick            |
| PARKING LIGHTS +|brown               |   |drivers kick panel          |
|       HEADLIGHTS|yellow              |+  |                            |
|     DOOR TRIGGER|gry/blk and blk/wht |-  |BCM in pass kick *3         |
|  TRUNK/HATCH PIN|ORANGE / black        |-  |BCM passenger kick          |
|TRNK/HTCH RELEASE|BLACK/ white         |+  |relay near pass. kick       |
|  FCTRY ALARM ARM|*5                  |   |                            |
|FCTRY ALRM DISARM|*5                  |   |                            |
|       TACHOMETER|white or RED / black  |   |coil/dist. assembly *1      |
|       BRAKE WIRE|light blue          |+  |at brake switch             |
|     HORN TRIGGER|black               |-  |black conn. st. column      |
|           WIPERS|green or gray       |+  |black conn. st. column      |
|  LF WINDOW UP/DN|dk. blue - brown    |A  |in drivers door             |
|  RF WINDOW UP/DN|lt. blue - tan *4   |A  |in drivers door             |

Notes:

*1 White-V6, RED / black-V8. Location is front of left cylinder head for V6 and at a 4 pin plug at the passenger side valve cover for the V8.  *2 The tan will unlock the drivers door and the gray/black will unlock the passenger door.  Wire each as a 5-wire system with separate relays. See direct fax document # 1052  *3 Seperate left and right door triggers, diode isolate.  *4 Bypass module for driver's window and connect directly to motor leads. In passenger door motor wires are dk. blue and brown.  *5 Some models are equiped with a factory alarm. The only way to disarm these alarms is with the factory remote or turning on the ignition.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
moshe 
Member - Posts: 26
Member spacespace
Joined: September 07, 2002
Location: Canada
Posted: September 07, 2002 at 8:49 AM / IP Logged  

i have problem with the factory alarm i did power the ign with the unlock

and bypass the vats

now the engein won't start

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 07, 2002 at 8:52 AM / IP Logged  

Did you make sure that the ORANGE wire is connected ?? This is also your second ignition connection that needs to be energized in order for the VATS to be disabled properly. How did you disale the VATS ?? With a bypass module ?

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
moshe 
Member - Posts: 26
Member spacespace
Joined: September 07, 2002
Location: Canada
Posted: September 07, 2002 at 8:57 AM / IP Logged  

i bypass with 5.3 ohm resi

i powered only the pink wire

moshe 
Member - Posts: 26
Member spacespace
Joined: September 07, 2002
Location: Canada
Posted: September 07, 2002 at 8:59 AM / IP Logged  

there is two pink wires (ign)

i powered only one

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 07, 2002 at 11:04 AM / IP Logged  

This is what you have to do to find the correct resistance:

This system uses a resistor in the key, use a digital volt meter set to ohms and put 1 lead on each side of the vats chip in the center of the key, find a resistor to match your reading.

Locate the Orange or Black tube running down the steering column from the ignition switch. Cut open the tube to epose the passkey wires insie. Your resistor or trumpet should be within +/- 10 ohms of the key. Either of the passkey wires can be cut. GM uses only a fixed number of different resistors with their PASSKEY/VATS system, your measurement should correspond to one of the following values.

390 Ohms1470 Ohms4750 Ohms
520 Ohms1800 Ohms6040 Ohms
680 Ohms2370 Ohms7500 Ohms
885 Ohms3010 Ohms9530 Ohms
1130 Ohms3740 Ohms11800 Ohms

Go to this link for the relay configuration: https://www.the12volt.com/downloads/file.asp?ID=237

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer