Code Alarm CSI 400, 2003 Honda Civic LX

I've put a multimeter to the pins of the switch and theres a 11.something drop between so its definately connected correctly. Likewise I've tried shorting the pins so I don't think it's the button to blame. Also, the system is only keyless and remote start so I don't think it has an actual valet mode. There's a kill switch for the remote start but other than that. Let me know if i'm missing something. And ya, the operators manual and not to mention the install manual are pretty weak. They also included a DIY DVD which basically covered how to use a multimeter lol.

Its temp cause its a lease :P. The less marks for the dealer to catch the better. Also this install coincides with a carputer I'm working on. If i do buy the car when the lease is up I want to intergrate the two

what setting did u set the meter to when teseting the switch. do you have a continuity seting.

just because its a lease dont mean you cant add something to it. each dealer is different though. call and ask first, dont tell them you are doing it, just ask if one can be installed, skip the remote start part. if they say yes get it in writting. that what i did to mom car.

Hooked up the TAC and everything was smooth from there. Thanks again guys. Cobelli