97 ford taurus remote start

Home / the12volt's Install Bay / Car Security and Convenience / 97 ford taurus remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: July 12, 2004 at 6:38 PM / IP Logged

hi everyone

i installed remot starter to ford taurus 1997 so i had to bypass the security

what i did i took the chip out of one key and i put the other one inside the steering coil with the glue it worked good for few days.and i forgot to say that i broke the one inside the steering coloom.now what happend the key inside the steering coloom fell down .i cant find it and the other one has no chip. the car now not working not with the key and not with starter .some one can advise me what to do plzzzzz

thanks

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: July 12, 2004 at 7:01 PM / IP Logged

You need to find the pellet. Undo the plastic around the column and look there.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 12, 2004 at 7:20 PM / IP Logged

I love cheap people....you should have bought the correct bypass in the first place. If you can't find the pellet, you are screwed.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: July 12, 2004 at 7:32 PM / IP Logged

Cant it be bypass complety? or u need the chip for that.

Scott35

Silver - Posts: 258

Joined: August 02, 2002

Location: United States

Posted: July 12, 2004 at 7:38 PM / IP Logged

If he can't find it, won't it have to be towed to the Ford place to be hooked up to the machine to have a new master programmed to it?

Tacomacrew

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 12, 2004 at 8:06 PM / IP Logged

Scott35 wrote:

If he can't find it, won't it have to be towed to the Ford place to be hooked up to the machine to have a new master programmed to it?

Yeah, that's what I meant when I said he was screwed.

He'll probably be out almost $200 now for towing, programming and new keys versus spending $30 for a bypass module in the beginning.

Mr_Fusion

Copper - Posts: 113

Joined: April 03, 2002

Location: United States

Posted: July 12, 2004 at 8:41 PM / IP Logged

I don't think you need a master key with this car...check the attachment under programming instructions "B".

Sorry for the image, I had to keep it 30kb or less. Send me your e-mail and I can send you the original document if you can't read it from here.

Mr_Fusion

Copper - Posts: 113

Joined: April 03, 2002

Location: United States

Posted: July 12, 2004 at 8:42 PM / IP Logged

I don't think you need a master key with this car...check the attachment under programming instructions "B".

Sorry for the image, I had to keep it 30kb or less. Send me your e-mail and I can send you the original document if you can't read it from here. 97 ford taurus remote start -- posted image.

97 ford taurus remote start -- posted image.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: July 12, 2004 at 9:31 PM / IP Logged

Mr. Fusion, I can't really read what your image says but it probably has something about how to program additional keys using only one key. Problem is, the original poster has NO working keys left.

Mr_Fusion

Copper - Posts: 113

Joined: April 03, 2002

Location: United States

Posted: July 13, 2004 at 12:12 AM / IP Logged

Not according to this...this procedure is for programming a NEW master key WITHOUT any existing keys. This is supposed to work on the earlier Ford PATS systems like the '97 Taurus. I can send anyone the original JPG if they would like to see it.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.