alpine cda7892

Home / the12volt's Install Bay / Car Audio / alpine cda7892 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Nstaller36609

Member - Posts: 24

Joined: September 02, 2003

Posted: July 15, 2004 at 11:31 PM / IP Logged

the display on my radio says interrupt how do i get it off .It was working fine and it just came up with this message thanks in advance for your help.

Nstaller36609

Member - Posts: 24

Joined: September 02, 2003

Posted: July 17, 2004 at 10:40 AM / IP Logged

dont tell me nobody knows what is wrong with this thing

Nstaller36609

Member - Posts: 24

Joined: September 02, 2003

Posted: July 19, 2004 at 9:28 AM / IP Logged

Thanks for ALL THE HELP

chevyman26

Copper - Posts: 227

Joined: April 14, 2004

Location: United States

Posted: July 19, 2004 at 9:44 AM / IP Logged

Hey, sorry nobody has been able to help you. I have never seen this problem, but I would guess that it has something to do with the audio interrupt feature. Do you have an on board cell phone or GPS system with voice prompts? If not, check to make sure that there is nothing hooked to the pink/black wire on your wiring harness, or that it is not contacting anything at all.

Also, have you tried resetting the hu? There is a little button that can be pressed with a pen or anything small in the flat area behind your faceplate.

You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."

Nstaller36609

Member - Posts: 24

Joined: September 02, 2003

Posted: July 19, 2004 at 6:23 PM / IP Logged

The first thing i tried is resetting it but it was still there

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: July 19, 2004 at 6:31 PM / IP Logged

try unplugging the power cord for 30 minutes or so and replugging it in.... any difference?

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

chevyman26

Copper - Posts: 227

Joined: April 14, 2004

Location: United States

Posted: July 20, 2004 at 1:06 AM / IP Logged

If none of the above works you will probably have to send it in, as somehow it is getting the signal through the audio interrupt system, and if there are no external triggers (something contacting the pink/black wire), then there is something shorted across it inside. Unless someone else can think of anything...?

You'd better get me out of this lord... or else you'll have me to deal with. -- Hunter S. Thompson "F.A.L.I.L.V."

Nstaller36609

Member - Posts: 24

Joined: September 02, 2003

Posted: July 20, 2004 at 8:59 AM / IP Logged

left it disconnected for 2 days and its still on alpine cda7892 - Last Post -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alpine cda7892

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.