LED help

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / LED help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

viper04649

Member - Posts: 17

Joined: July 12, 2004

Location: United States

Posted: July 17, 2004 at 12:10 AM / IP Logged

i am planning on making a grill for my sub out of florescent acrylic and using leds to light it up.

will a uv led light up the acrylic better?

i know i want to run a wire from the ignition to a switch to a relay, from the relay, i will wire the leds (i am thinking 4 at the moment). i think that is what i need to do, don't know how to do this.

where to get relay, and switch?
what gage wires?
should i fuse, if so how many amps?
are resistor or anything else used.

also, on the box, i want to be able to plug unplug the grill(i mean the leds from the power)

-travis

Back to Top

viper04649

Member - Posts: 17

Joined: July 12, 2004

Location: United States

Posted: July 17, 2004 at 12:11 AM / IP Logged

also, is there anything that i should read that might help with any of this?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LED help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.