BMW 330i Handle mrd-m1001?

Home / the12volt's Install Bay / Car Audio / BMW 330i Handle mrd-m1001? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: July 21, 2004 at 1:51 PM / IP Logged

How good are eclipse amps? I found one that looks like it may work. CLICK (model # 34230) It says the amp will run 370 x 2 watts RMS @ 4 ohm. SOO could i run each 4 ohm voice coil in the DVC sub on one channel giving the sub a total of 740 watts rms? I guess my ? is if you can run each VC off a diff channel of the same amp? If this would work do you think the alt. could handle this amp.

dream it, build it, fiberglass it

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: July 21, 2004 at 2:04 PM / IP Logged

also would this CLICK Help with connecting the amp to the factory cd player?

dream it, build it, fiberglass it

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: July 21, 2004 at 8:12 PM / IP Logged

As far as I know a LOC is the same thing as a high level converter, if not than I guess thats what I was trying to get at anyways. And if the other guy is running a MTX 1501D and not having any problems than I would guess that Alpine would be fine because that MTX amp is a current pig, I know, I used to sell em.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: July 21, 2004 at 10:58 PM / IP Logged

any opinions on the eclipse amp

dream it, build it, fiberglass it

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: July 21, 2004 at 11:14 PM / IP Logged

That converter looks like it would work just fine, although you might look into forbidden's suggestion for the Audio Control processor...The amp will put out stereo with the two channels, so a coil on each channel will have a different input from the other coil. I have seen both pros and cons for wiring coils separately. I think, though, that if the RCA inputs to the amp were combined with Y cables to form a mono signal input to each channel, so that they were each the same input, you could go ahead and wire each coil like that. But I am just speculating, I haven't done it.

The Eclipse has a stereo/mono switch. I don't know if that itself will combine the left and right signals. That would do away with the Y cables if so.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: July 22, 2004 at 12:24 AM / IP Logged

From my understanding, that is exactly what the switch should do, at least thats what it has done on other amps I have used. The elipse are great amps adn should work wonders on that 15. And even though its not nessasary I think its kinda nice when everything matches up. If for no other reason than asthetics

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: July 28, 2004 at 9:05 PM / IP Logged

could anyone send me a wireing diagram for this? I think im going to go to a local audio store and see what they say about it. thanks

dream it, build it, fiberglass it

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: July 28, 2004 at 9:06 PM / IP Logged

could anyone send me a wireing diagram for this? I think im going to go to a local audio store and see what they say about it. thanks

dream it, build it, fiberglass it

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

BMW 330i Handle mrd-m1001?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.