P.S-Digital Clamp Meter

Home / the12volt's Install Bay / General Discussion / P.S-Digital Clamp Meter (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

*Kicker

Member - Posts: 4

Joined: July 24, 2004

Location: Canada

Posted: July 25, 2004 at 6:40 PM / IP Logged

i have a digital clamp meter handy...but i don't have the slightest idea how to use it, could someone explain it to me, so I could check my currents to my amp?

Back to Top

stereofreak

Member - Posts: 37

Joined: July 19, 2004

Location: United States

Posted: July 27, 2004 at 9:46 PM / IP Logged

open the clamp up and put it around the hot wire,and make sure its on DC volts.

if i can't make it sound good,then it is just a piece of crap anyway

Back to Top

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: July 28, 2004 at 11:00 AM / IP Logged

Actually, you will set the meter to DC Amps. You will also set the meter to the highest amperage range first, unless you know the current going through the system.

Starting from the highest current level will capture and ensure proper reading and protect the meter.

Please remember that the actual meter must have fresh batteries, otherwise the reading(s) will flutuate and be inaccurate.

Regards

EVIL Teken . . .

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

P.S-Digital Clamp Meter

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.