programming keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / programming keyless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

terryscomputer

Member - Posts: 1

Joined: September 14, 2002

Location: United States

Posted: September 14, 2002 at 3:45 PM / IP Logged

i have a 1993 ford explorerand i bought a second remote from ford and they gave me a general description of what type of remote i have (type b). it says to go to the drivers rear quarter panel and jump the two wires to set program mode. my question is which two wires am i suppost to jump, they either don't know at the ford dealership or just stupid. i talked to the parts and service dept but no one could help me. can you? thanks terry

Search for other posts by terryscomputer

Scott35

Silver - Posts: 258

This member has made a donation to the12volt.com. Click here for more info.

Joined: August 02, 2002

Location: United States

Posted: September 14, 2002 at 9:41 PM / IP Logged

Pull the tool panel cover off and look for a black plastic plug. You will have to feel around for it. When you find it just take a paper clip and jump it.

Tacomacrew

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.