the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

H3 Bulb connector


Post ReplyPost New Topic
< Prev Topic Next Topic >
markcars 
Silver - Posts: 662
Silver spacespace
Joined: December 11, 2002
Location: New York, United States
Posted: August 02, 2004 at 10:58 AM / IP Logged  
I purchased a pair of H3 bulbs and lamp-housings to add foglights to my car, but I don't know how to connect the wires to these bulbs since they don't have any sockets. I don't know if sockets are available (did a few searches on the internet but did not find any) or I have to screw one wire to the metal body and solder the other wire(the pigtail wire). Thanks.
poohbear 
Member - Posts: 1
Member spacespace
Joined: July 09, 2004
Location: Australia
Posted: August 07, 2004 at 1:38 AM / IP Logged  

are you sure its a H3? maybe its a 9006.....

markcars 
Silver - Posts: 662
Silver spacespace
Joined: December 11, 2002
Location: New York, United States
Posted: August 07, 2004 at 4:26 PM / IP Logged  
I am a little more than sure it is a H3. This is a picture of it:
H3 Bulb connector -- posted image.
Sarc 
Member - Posts: 4
Member spacespace
Joined: May 19, 2004
Location: United States
Posted: August 12, 2004 at 9:59 AM / IP Logged  
I'm not sure what you are going to be able to do.
In my car that came with fog lights that use the H3 bulbs, the retaining clip for the bulb itself doubles as the ground for the circuit.
Maybe you could use the fog light assembly out of another car?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, August 5, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer