system noise help

Home / the12volt's Install Bay / Car Audio / system noise help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

insanity

Copper - Posts: 52

Joined: June 24, 2004

Location: Cayman Islands

Posted: August 02, 2004 at 3:25 PM / IP Logged

ok... have a suzuki liana wagon... factory hu, jl components front and rear, jl 4channel on highs, 2 channel on one 10w7.. have upgraded to larger battery, installed 4 guage grounding kit in engine room, 0 guage pos cable to rear into pyle 5 farad cap as dist. o guage to ground and 4 guage from cap to amps... had a whinning noise in front left spk that turned out being a faulty amp.. replaced and now have very slight alt whine.. also has 4 guage from alternator to batt.. car just developed a popping noise in spks that increases in speed as the volume increases.. is it possible that the pac adapters are bad or wrong for this car??.. power and signal cables are nowhere close except at amps, and everything is tight!!

please help!!..... confused in cayman

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: August 02, 2004 at 5:06 PM / IP Logged

Could be your converter but if its a popping noise I would guess the ignition system. Id check and make sure your spark plug wires are tight and free of defects. Also try to keep some distance between your power wire and your spark plug wires

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

system noise help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.