Viper 350HV Install Help

Home / the12volt's Install Bay / Car Security and Convenience / Viper 350HV Install Help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stagger

Member - Posts: 24

Joined: August 01, 2004

Location: United States

Posted: August 02, 2004 at 8:16 PM / IP Logged

Hi, I just purchased a Viper 350HV. I have a few questions about the install procress.

1st, I assume this model has a built in parking light flash relay, so no external relay will be needed?

2nd, Im only doing a basic alarm, no remote start, so do I have to worry about Ignition 2 and 3, or just cut a wire ignition 1 into the relay?

3rd, The manual says "Since the Shock sensor does not work well when mounted firmly to metal, we do not recommend screwing down the control module" so should it just sit up in the dash, zip tied to something?

Thanks in advance....

-Rich

Back to Top

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: August 02, 2004 at 10:49 PM / IP Logged

no relay needed, there is a jumper for +/-

you only need the main ign

the shock sensor (isnt that in the brain on these alarms), is best when mounted to a firm wire harness with zips usually. turn the gain up or down to compensate.

MECP certified installer

Back to Top

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: August 07, 2004 at 7:22 PM / IP Logged

i have the same alarm on my truck but i dont fully rellik on the brains built in shock sensor you can plug in a dual zone dei shock sensor into the side port. make sure you use a dei sensor because anything else wont work.

gcorrea

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 350HV Install Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.