Run 2 1200.1’s off one run 0/1ga?

Home / the12volt's Install Bay / Car Audio / Run 2 1200.1’s off one run 0/1ga? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Xgen.m@$t3r

Member - Posts: 27

Joined: April 29, 2004

Location: United States

Posted: August 05, 2004 at 8:13 PM / IP Logged

I'm getting 1 kicker kx1200.1 and wanted to see if someone could help me find a cheaper 1/0 guage installation than I have found..

I also would like to see if anyone has any idea how I can run my 1 15" Kicker CVR and a Kicker Comp until I get another 15" Kicker CVR. Thats 3 4ohm subs, I need them to come out to be 1ohm, but have no idea how I can do it without 2 15" Kicker CVR's..

Any help would be nice, You can help me out on this Thread that I started of my own.. https://www.the12volt.com/installbay/forum_posts.asp?tid=36853&PN=1&tpn=1

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: August 05, 2004 at 11:01 PM / IP Logged

Me and forbidden had a discusion about this a couple days ago. He told me the length of the ground doesnt matter as long as the resistance is less than 1/2 and ohm. I checked around and talked toa couple other people and pretty much everyone I trusted on the topic agreed with Forbidden about this. Doesnt matter how long the wire is as long as the resistance is low enough.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Chad7n7

Silver - Posts: 408

Joined: March 09, 2004

Location: United States

Posted: August 06, 2004 at 12:16 AM / IP Logged

I also agreee with what Ravendarat is saying, what I would do is find a good chassis ground and check your resistance before stretching unneeded wire through your vehicle.

Also as someone else has mentioned,, if your resistance is low and you do decide to go with a chassis ground, be sure to use the same size ground wire as your power.

Back to Top

MBZ oe

Silver - Posts: 385

Joined: December 18, 2003

Posted: August 06, 2004 at 12:56 AM / IP Logged

Run 2 1200.1’s off one run 0/1ga? - Page 2 -- posted image.

boom, boom, boom boom....

Back to Top

MBZ oe

Silver - Posts: 385

Joined: December 18, 2003

Posted: August 06, 2004 at 12:59 AM / IP Logged

Its already wired up correctly with an excellent 0ga chassis ground. And I have been running both 1200.1's off of the one 0ga run and was just wondering what you guys thought about the full length ground idea. I have 50' of Stinger HPM 0/1ga so it wouldn't be a problem.

boom, boom, boom boom....

Back to Top

MBZ oe

Silver - Posts: 385

Joined: December 18, 2003

Posted: August 06, 2004 at 12:59 AM / IP Logged

0ga is run from my 190 amp alternator as well.

boom, boom, boom boom....

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Run 2 1200.1’s off one run 0/1ga?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.