2003 Acura TL-S, Clifford 3.5

Also, any idea how to wire the 451m relay to work with my + trunk pop?  I didn't buy a relay yet, and figured I'd use the 451m if I could :).

Trunk Release WHITE (+) DRIVER'S UNDERDASH FUSE/RELAY BOX* white wire above to pin 87 of relay neg out put from alarm to pin 85 12 volts to pins 86 and 30 you need to fuse pins 86 and 30 with a min. of 10 amp fuse......Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Just wanted to say thanks to Jworm, and draasch for being so patient with me and answering my questions.  I've got about 3/4 of the alarm installed.  Still need to do the 530t's.  Also, I don't have the brake or neutral safety switch hooked up yet, but when I remote start, I hear relays clicking and flashing my lights.  Is this normal?  And when I actually get in the car and start driving, what turns off the remote start?  Is it the brake switch?  Is that why you have to put in the key and turn it to on before stepping on the break?  Becuase right now I have to turn it off with the remote.  Also, is it ok to cut the wires of the antennae and extend them?  I mounted the antennae at the top of my rear window, and need to extend the wire to reach the alarm brain up front.  Finally, the most difficult thing seems to be finding a place to mount everything!  There's just not  a lot of room under the dash!  Oh, and the range isn't anywhere close to 1/4 mile :(.  More like around 100yards.  Does  this sound normal?

There's a lot of white wires in that area :(.  Any idea which one, or how I can test it?