Opinion’s With alarm Idea

Home / the12volt's Install Bay / Car Security and Convenience / Opinion’s With alarm Idea (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Luvs2Race

Member - Posts: 5

Joined: March 05, 2003

Location: Canada

Posted: August 08, 2004 at 12:37 AM / IP Logged

Hey I was just wondering when I get my alarm can I hook up the Aux outputs to my bags?? So say i push the Trunk open button it raises or drops the whole truck. And when I arm it the truck drops and when i dis-arm it the truck rises??

1. For the truck to drop/raise with the aux outputs i can just put a relay and hook it up to all the valves. But the problem is do you think they pulse sent by the alarm will be long enough?

2. Do u guys have ne ideas to make the truck drop when the alarm is armed and to raise when the truck is dis-armed?

Lemme hear some ideas. Thanks.

Luvs2Race

Member - Posts: 5

Joined: March 05, 2003

Location: Canada

Posted: August 08, 2004 at 12:38 AM / IP Logged

Oh btw it takes the truck a little less than a second to raise/drop

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 08, 2004 at 2:07 AM / IP Logged

Need to know what type of alarm. I have done it before on fast valves.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

kronik66

Member - Posts: 39

Joined: August 02, 2004

Location: United States

Posted: August 08, 2004 at 3:37 AM / IP Logged

you can also use a capacitor and a resistor to adjust the timing of the relay pack. look in the relay section off this site it will tell you how to change pulsed to constant and how to time your relays.

";p

Luvs2Race

Member - Posts: 5

Joined: March 05, 2003

Location: Canada

Posted: August 08, 2004 at 1:36 PM / IP Logged

I was thinking of getting a compustar pager alarm.

Luvs2Race

Member - Posts: 5

Joined: March 05, 2003

Location: Canada

Posted: August 08, 2004 at 2:30 PM / IP Logged

Maybe Someting Like this will work??

Opinion’s With alarm Idea -- posted image.

tcool

Copper - Posts: 100

Joined: September 06, 2003

Location: United States

Posted: August 08, 2004 at 2:30 PM / IP Logged

With the Compustar programmer you can time your two auxiliary outputs for pulse, latch or timed between 1- 99 seconds.

bzzzzttttt

Joen

Member - Posts: 13

Joined: July 11, 2004

Location: United States

Posted: August 10, 2004 at 1:33 AM / IP Logged

check for www.electric-life.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Opinion’s With alarm Idea

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.