Rattler 310D question

Home / the12volt's Install Bay / Car Security and Convenience / Rattler 310D question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

GregK

Copper - Posts: 74

Joined: December 30, 2003

Location: Manitoba, Canada

Posted: August 11, 2004 at 11:19 AM / IP Logged

How do I wire a bypass on the Rattler 310D so that my old "Your Valet" remote start will work without tripping the alarm? There doesn't appear to be a bypass input on the alarm module.

The car is a 1993 Grand Am if it makes any difference.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: August 11, 2004 at 10:31 PM / IP Logged

You wire the WHITE/ blue on the 310 D to the WHITE/ blue on the remote start.

Then you wire the blue status out on the remote start to the blue multiplex input on the alarm.

When you activate the starter via the alarm remote, it will shunt shock sensor and ign inputs.

GregK

Copper - Posts: 74

Joined: December 30, 2003

Location: Manitoba, Canada

Posted: August 12, 2004 at 8:06 AM / IP Logged

Thank you!

I do need to clarify one wire though. The only blue input on the alarm is the zone 1 instant trigger for hood and trunk pin switches. Is that the input you meant?

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: August 12, 2004 at 10:51 AM / IP Logged

you betcha

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

GregK

Copper - Posts: 74

Joined: December 30, 2003

Location: Manitoba, Canada

Posted: August 12, 2004 at 11:11 AM / IP Logged

I'm guessing that I need to diode isolate the status out line as well.

Sorry, I usually install combo systems, this is my first seperate.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: August 12, 2004 at 3:50 PM / IP Logged

shouldn't if it's only used for the alarm shunt

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

GregK

Copper - Posts: 74

Joined: December 30, 2003

Location: Manitoba, Canada

Posted: August 12, 2004 at 10:18 PM / IP Logged

Thank you very much! It worked like a charm, but you knew it would. :-)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rattler 310D question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.