Ford Aerostar

In the areostars with the controls behind the drivers side seat, what do you guys do to bypass the ones that dont use the standard ford plug. I always ran new wires to all the speakers in the vehicle but am wondering if there is a easier way.double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

You have to run new wires to the front speakers. You have to run a wire from the drivers middle 6x9 up to the headphone control. From there you can find the 2 rear and passenger middle speaker wires. Tie the driver rear and the new wire 6x9 together and wire them to the matching color wires corresponding to the colors at the radio harness. Do the same for the passenger wires.Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

that will save me some time thanx. The one that came into today had the standard harness so it was fine but ill keep this on file for later.double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

This is for all aerostars with the rear headphone controls. Wait til you get one with the factory EQShaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta