1998 Dodge Ram IGN 2 wire

Home / the12volt's Install Bay / Car Security and Convenience / 1998 Dodge Ram IGN 2 wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Foolish

Member - Posts: 11

Joined: August 07, 2004

Location: United States

Posted: August 16, 2004 at 4:15 PM / IP Logged

I am installing a remote start alarm (code alarm power elite 7600). Have every thing working but the remote start. The IGN 2 wire (black white) does not have voltage in the start position. *Some diagrams say IGN2 is blk/white some say its blk/oranage...either way both drop voltage in the start position. Starting to think the code alarm unit is faulty but I can use the quick leave feature and remove the keys from the vehicle and still have it run. All else is hooked up ie IGN 1, starter, tach, heat/ac, etc.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: August 16, 2004 at 5:02 PM / IP Logged

Blakc/White is not needed for remote start, it's accually 2nd Acc and pretty much only powers the Radio and wipers.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1998 Dodge Ram IGN 2 wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.