LCD Digital Voltmeter Mounting

Home / the12volt's Install Bay / General Discussion / LCD Digital Voltmeter Mounting (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

blues

Member - Posts: 1

Joined: August 17, 2004

Posted: August 17, 2004 at 10:20 AM / IP Logged

I've just bought a digital voltmeter (EM32-1B) from Lascar Electronics, to monitor my battery and alternator voltages (recently burnt out the alternator). I've got it all up and running, and the LCD voltmeter works very well. Problem is, it needs a round hole with a 32.5mm diameter. Does anybody know of a tool to make a tidy round hole without damaging the surroundings ? The meter's chrome bezel will hide about 2mm of imperfection.

Back to Top

switch_hitter

Copper - Posts: 151

Joined: August 03, 2004

Location: United States

Posted: August 17, 2004 at 1:48 PM / IP Logged

a dremel, and a steady hand

2 Memphis HPO 12s

1 Memphis 1000D

2 Memphis 8s

1 Memphis MC200

4 Memphis 3way 6 1/2s

1 Memphis MC3004

4 Memphis Tweeters

1 Memphis 3-way electronic crossover

2 Memphis 5 1/4

2 Memphis 4s

Back to Top

TonyPTX

Member - Posts: 16

Joined: July 26, 2003

Location: United States

Posted: September 11, 2004 at 12:43 AM / IP Logged

I would guess that you no doubt are drilling into some piece of plastic trim?

A spade bit for wood would work just fine. Check out your local home improvement store. A 1 1/4 " spade bit should do it.

TOny

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

LCD Digital Voltmeter Mounting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.