the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

RSX 3.5 remote questions


Post ReplyPost New Topic
< Prev Topic Next Topic >
lilboi 
Copper - Posts: 126
Copper spacespace
Joined: May 01, 2004
Location: United States
Posted: August 17, 2004 at 11:40 PM / IP Logged  
I noticed that sometimes, when i lock my car, the lcd display will show Shock sensor 1, several seconds (3-5) after i lock it. What does this mean.
kkeeni 
Member - Posts: 20
Member spacespace
Joined: July 28, 2004
Posted: August 17, 2004 at 11:54 PM / IP Logged  
try to wait a couple of seconds after you shut your door, then arm it. its probably still detects the shock sensor from you shuting the door and triggers sensor 1.
lilboi 
Copper - Posts: 126
Copper spacespace
Joined: May 01, 2004
Location: United States
Posted: August 18, 2004 at 10:31 PM / IP Logged  
any one have this problem? I'm not sure if that's the reason. Maybe i'm wrong, i keep thinking that i'm bypassing it.
kkeeni 
Member - Posts: 20
Member spacespace
Joined: July 28, 2004
Posted: August 19, 2004 at 1:19 PM / IP Logged  
yes i have the same alarm system and mine does the same thing when you arm it right after you shut the door , and some of our customers call with the same problem, it worked for them..
kenmci 
Copper - Posts: 161
Copper spacespace
Joined: July 15, 2003
Location: United States
Posted: August 19, 2004 at 1:26 PM / IP Logged  
what happens is when you arm the alarm, the alarm checks all of the sensors, doors etc.  It then bypasses any zones that are being triggered so that the alarm will arm.  If you left the door open it would do the same thing only it would show the door icon instead of sensor 1.  There is nothing wrong with the alarm it is simply showing you that the shock sensor was going off when you armed the car, so the shock sensor was bypassed, just hit lock again and it will turn the shock sensor back on.
Frys24 
Member - Posts: 2
Member spacespace
Joined: August 19, 2004
Location: United States
Posted: August 19, 2004 at 2:36 PM / IP Logged  
I have the same thing happen to me with my personal remote. its a crimestoper. after disarming then rearm it shows my shock sensor warning. then i just press arm again and it stops. i think its normal for most 2way pagers.
Fry's Electronics store #24 Concord, Ca.
lilboi 
Copper - Posts: 126
Copper spacespace
Joined: May 01, 2004
Location: United States
Posted: August 19, 2004 at 4:15 PM / IP Logged  
Cool. Thanks. I have my sensitivty set on really high. I don't mind for false alarms.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer