reverse wire & camera

Home / the12volt's Install Bay / Car Security and Convenience / reverse wire & camera (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

blingo

Member - Posts: 30

Joined: August 07, 2004

Location: United States

Posted: August 18, 2004 at 10:09 PM / IP Logged

I am looking to hook up a backup camera, and i want my indash screen to automatically switch to video mode 2, which would be the camera when i put the car in reverse. how do i go about doing that?

tanz2004

Member - Posts: 26

Joined: July 06, 2004

Location: United States

Posted: August 19, 2004 at 4:20 PM / IP Logged

Might be good for a little more information on your Indash Screen! I have a work truck that has a back up cam and when I put the truck in reverse my screen goes to Vid In 2 because it sees that there is power there. However I had to change the settings to override averything else. If you can change your settings that should work for you too.

TanZ2004

Washington State

blingo

Member - Posts: 30

Joined: August 07, 2004

Location: United States

Posted: August 19, 2004 at 4:25 PM / IP Logged

the screen is a sony xav-7w. i have not seen any settings to do this on there,

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reverse wire & camera

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.