Alpine CDA-9835

Home / the12volt's Install Bay / Car Audio / Alpine CDA-9835 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mikejc

Member - Posts: 23

Joined: October 21, 2003

Location: Canada

Posted: August 19, 2004 at 7:21 PM / IP Logged

I have recently installed a Alpine CDA -9835, the guy already had a system in his car (2-15" mtx with 800 W amp, with a set of 6 1/2" clarion in the front doors and the rear, but the front 6 1/2 have a built in tweeter plus he has a set of tweeters on a cross over in the pillars in the front window. His speakers are hooked up to an amplifier aswell- 400w) When I hooked up the 9835 it distorted the speakers really bad. I know its in the settings of the built in EQ and X-Over of the deck. How do I set-up the X-Over? What settings should i have it on for Low, Mid Low, Mid High, and High? What slope? what db? Is there a way to take all bass out of the speakers and leave the subs at full?

Back to Top

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: August 19, 2004 at 10:40 PM / IP Logged

you can have some fun with this deck....... it is an i-personalize deck. You can go to the alpine website and adjust a 7 band graphic EQ, also you can set crossover cutoffs, last but not least, Time Correction settings..... VERY adjustable deck..... i enjoy mine alot

Back to Top

jakediggity

Copper - Posts: 84

Joined: July 12, 2004

Location: United States

Posted: August 19, 2004 at 10:52 PM / IP Logged

I have the same deck and when i wired a set of infinity kappa 4's that have crossovers they distorted horribly as well. I think it may be the fact that the deck is running through an additional crossover i dont know but i have the same problem and dont know what to do.

Back to Top

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: August 19, 2004 at 10:55 PM / IP Logged

try pressing the reset button on the face of the deck......

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine CDA-9835

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.