Smartwindows with matrix 3.5

Home / the12volt's Install Bay / Car Security and Convenience / Smartwindows with matrix 3.5 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

twiztedkonceptz

Member - Posts: 2

Joined: August 20, 2004

Location: United States

Posted: August 20, 2004 at 8:23 PM / IP Logged

I just picked up the matrix 3.5 and i have installed the alarm before on my si, and a few other cars, but i have never tried installing it with the smartwindows and i have heard that it can be done? the reason why i wanted to use the smartwindows instead of the 530t is because the 530t needs an output off of my alarm and since the alarm only has three (one for the remote start) and the other two i need for my doors because they are shaved it wont work. Does anybody know if this is possible, or am i just screwed???? Any help is appreciated!

Nick

Back to Top

Search for other posts by twiztedkonceptz

Drey

Member - Posts: 35

Joined: April 17, 2003

Location: Andorra

Posted: August 20, 2004 at 11:43 PM / IP Logged

there is that directed part that takes one output and turns it into 6.... that should be plenty :)

Back to Top

twiztedkonceptz

Member - Posts: 2

Joined: August 20, 2004

Location: United States

Posted: August 20, 2004 at 11:56 PM / IP Logged

do you know what part it is by any chance?

Nick

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Smartwindows with matrix 3.5

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.