2001 Jeep Grand Cherokee Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Jeep Grand Cherokee Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 21, 2004 at 6:47 PM / IP Logged

crimson wrote:

The instructions in my remote start manual say, disconnect the ignition input to the factory alarm system, and connect this (the yellow/black) wire to it.

No this wire does not go to a factory alarm, only works with aftermarket alarms. There is no way to arm the factory alarm while the vehicle is running. You may be able to re-arm the factory alarm after the remote start shuts down, at the most.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

crimson

Member - Posts: 9

Joined: August 18, 2004

Location: United States

Posted: August 21, 2004 at 6:57 PM / IP Logged

crimson wrote:

Sorry I didn't state that clearly at first. The instructions in my remote start manual say to disconnect the ignition input to the factory alarm system, and connect this (the yellow/black) wire to it. This yellow/black wire is supposed to work like the ignition input to the factory alarm does, only it will not have power until the key is turned in the ignition. Then the key in the ignition takes over, and the vehicle is on normal run mode (not off the remote start). I may sound a little mixed up, but my friend could explain it in detail. I am just looking for an alternative from what I have.

crimson

Member - Posts: 9

Joined: August 18, 2004

Location: United States

Posted: August 21, 2004 at 8:28 PM / IP Logged

OK, if I go with an aftermarket alarm, Do I have to find one compatible with the remote start? I have a Jensen brand remote start. But I can't find an alarm but that it has two different keyfobs. How do I tie in an aftermarket alarm to this remote start system?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Jeep Grand Cherokee Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.