1995 Bronco, Blowing door lock fuses

This is a great site! To start, this is my first alarm install. I am putting an Autopage RF-310 in a 1995 Bronco. I do not have keyless entry. Everything is working great except the door locks. I researched this site before the install, and put in two SPDT relays. I have wired the 87 and 86 to 12 volt constant, and 85 to the alarm output. I cut the Pink / YELLOW wire in the passenger side kick pannel and ran #87a to the side going up to the passenger door switch and the #30 to the other side of the cut wire. Did the same for the Pink/Green. Now, all it does is blow fuses.  I took off the alarm outputs and tried to get it to work by grounding the relay wire, but that blows the fuses also. I ran the Green alarm wire to the lock side, and the blue alarm wire to the unlock side. Any ideas from you alarm experts? Also, what size wire and fuse should I be running for the 12 constant to both relays? I put the relays in the passenger kick pannel about 4-5 feet from the power source. Thanks so much!!