Bypassing clutch during remote start

Home / the12volt's Install Bay / Car Security and Convenience / Bypassing clutch during remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mattthew278

Copper - Posts: 52

Joined: November 13, 2003

Location: United States

Posted: August 30, 2004 at 9:10 PM / IP Logged

I'm installing a Viper 550 into my truck and I need to bypass the clutch. I had it set up before so the clutch was bypassed all the time but I wanted to change it. I was reading through the manual, and it seems like I could use the "(-) 200 mA Status/Factory Alarm Rearm wire to activate a relay which could bypass the clutch. My question is would the - output from that wire be sent out to the relay in time to have it activated before the starter was actually engaged? Thanks in advance for your help.

matt

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 31, 2004 at 1:29 AM / IP Logged

yes it will be in time, youll need a relay to properly send a signal to the clutch wire.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

vbel

Copper - Posts: 246

Joined: July 15, 2004

Location: Canada

Posted: August 31, 2004 at 10:20 AM / IP Logged

Hm, that's what I was also told, that I need a relay... I bypassed my clutch with directly connecting that wire to the clutch wire...if that's not enough, the same wire triggers my bypass module, at the same time. No relay needed.

slipkx2

Member - Posts: 4

Joined: August 31, 2004

Location: United States

Posted: September 01, 2004 at 1:14 PM / IP Logged

make sure that you leave it outta gear or eles you may find yourself running after your truck with no way of stopping

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: September 01, 2004 at 2:03 PM / IP Logged

Hope U hook up By-Pass Relay on Emergency Brake also

Don't Learn from Others Mistakes

You Might Be the One That Knows.

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: September 03, 2004 at 2:14 AM / IP Logged

YOU THE DIODES THAT FAST AND EASY WAY IF DON'T WORK THEN YOU RELAY 87(-)86(+)30GO TO THE CLUTCH AND 85 GO TO ALARM

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bypassing clutch during remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.