the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Garage door open with Alarm Aux Output


Post ReplyPost New Topic
< Prev Topic Next Topic >
robb420in323 
Copper - Posts: 101
Copper spacespace
Joined: July 13, 2004
Location: Ontario, Canada
Posted: September 14, 2004 at 8:51 PM / IP Logged  

I wanted to activate my Locks,ALarm and Garage door with one remote.

So I Ran a relay to one of my Alarms Outputs. The relay was negative trigerd with a 12volt source. So now the relay is a Open\Close switch. Activated by remote

I disassembled the Garage door opener.  And Modified the button By coiling its Pins with Wire strand and solder..    Which left the door opener always ON.

Then Interuped the Battery Contacts with half a foot of 16G Wire. Cut the wire and wire it to the relay. Screw the relay onto the GD opener mount to Dash frame

                                                                                                                                                                                                                                                                           

Hunter S. Thompson for sheriff
mo12v 
Platinum - Nominee - Posts: 2,748
Platinum - Nominee spaceThis member consistently provides reliable informationspace
Joined: September 30, 2003
Location: Afghanistan
Posted: October 02, 2004 at 5:15 PM / IP Logged  
I just use a Single Channel Receiver in the garage that picks up my Remote
$ 12.95
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
robb420in323 
Copper - Posts: 101
Copper spacespace
Joined: July 13, 2004
Location: Ontario, Canada
Posted: October 07, 2004 at 12:34 PM / IP Logged  

my mod only cost me 1 relay and a garage door opener. everyone in the house has one.

The Garage door opening units are 10bucks.

and the relay was only 2 b`ucks

Hunter S. Thompson for sheriff
Sexified 
Copper - Posts: 87
Copper spacespace
Joined: October 17, 2004
Location: Canada
Posted: October 19, 2004 at 6:21 PM / IP Logged  
how 'bout putting a small chain on the garage door opener and gluing your remote to the top of it?
ha,ha,ha just thought i would throw that in there.
sweet.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 23, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer