subs with 4 channel

Home / the12volt's Install Bay / Car Audio / subs with 4 channel (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Pass the Roc

Copper - Posts: 51

Joined: August 08, 2004

Location: Canada

Posted: September 17, 2004 at 2:47 PM / IP Logged

ok i have 2 pioneer subs at 4 ohm. and an mtx 4 channel amp at 200 watts 4ohm bridged. now i want to bridge both subs into this amp. but my deck only has one subwoofer output for rca. so i can only get one of my subs pounding. how do i get both to work?

Back to Top

KPottsie78

Member - Posts: 7

Joined: October 25, 2003

Location: United States

Posted: September 17, 2004 at 3:39 PM / IP Logged

use y-splitters on the rca's. or a lot of 4 channel amps have a switch on them to select 4 channel input or 2 channel input. If it has that just select 2 channel input.

Back to Top

Pass the Roc

Copper - Posts: 51

Joined: August 08, 2004

Location: Canada

Posted: September 17, 2004 at 3:53 PM / IP Logged

i must need the splitters because i tired the 2 channel out put and it still didnt work

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

subs with 4 channel

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.