What Alarm Do I Have?

Home / the12volt's Install Bay / Car Security and Convenience / What Alarm Do I Have? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

tecca

Member - Posts: 11

Joined: September 22, 2004

Location: United States

Posted: September 22, 2004 at 12:24 AM / IP Logged

I'm farly new to the alarm industry, so bare with me. I bought a 1994 Mustang. When i bought they said, to their knowlege, they didnt think there was an alarm on it. After looking around a bit i found what looks to be an alarm system. They keys are not the orginal, nor do they have a keypad on them. The only info that i have found on any of the hardware were there Model #'s and Serial #'s. I have looked around and cannot find any results...

Model #: PEUP-3CH.-PB.V.3

Serial #: 80582

Made in the U.S.A. 12-1995

Any Idea's????

Love, Peace, And Chicken Greese

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 24, 2004 at 5:32 PM / IP Logged

Open the unit, or give us the FCC ID on the remote control unit.

Regards

EVIL Teken . . .

tecca

Member - Posts: 11

Joined: September 22, 2004

Location: United States

Posted: September 24, 2004 at 8:56 PM / IP Logged

I dont have the remote, that half the reason for my search for a manufacturer. I will open the unit up tomorrow, and giva ya guys an update. Thanks.

tecca

Member - Posts: 11

Joined: September 22, 2004

Location: United States

Posted: September 27, 2004 at 10:40 AM / IP Logged

F8AB-15K601-AA

FCC ID: CWTWB1U313

CAN: 1788 102 352

Love, Peace, And Chicken Greese

tecca

Member - Posts: 11

Joined: September 22, 2004

Location: United States

Posted: September 27, 2004 at 12:48 PM / IP Logged

The Unit itself

The Remote

Love, Peace, And Chicken Greese

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 27, 2004 at 3:12 PM / IP Logged

It would be nice if you could write out what is written on the back of the unit, as there may be some words / phrases that might job my memory.

The key fob sure looks like a OEWM unit, but then again that doesnt mean much.

Open the unit, there will be something in there.

Regards

EVIL Teken . . .

tecca

Member - Posts: 11

Joined: September 22, 2004

Location: United States

Posted: September 28, 2004 at 12:41 AM / IP Logged

Inside:

"PIC16C57-RC/P

9534CDW Microchip"

Outside:

RED (= 12V. MAIN POWER INPUT)

WHITE/ ORANGE (PARKING LIGHT OUTPUT +12V.)

ORANGE (SIREN OUTPUT +12V .3AMP)

GREEN/ BLACK (LOCK NEGITVE PULSE)

YELLOW (UNLOCK NEGATVE PULSE)

GRAY (STARTED KILL NEGATIVE OUT)

RED / BLACK (LED NEGATIVE PULSE)

WHITE/ YELLOW (DOME LIGHT NEGATIVE PULSE)

BLUE (NEGATIVE TIGGER FOR SENSOR)

VIOLET (VALLET NEGATIVE INPUT)

GREEN (SWITCHED 12V. ACC.)

BLACK (SYSTEM GROUND)

WHITE (DOOR TIGGER POSITIVE)

BLUE/WHITE (DOOR TIGGER NEGATIVE)

__________________________________________________________________

2 PIN CONNECTOR

WHITE/ RED (3RD CHANNEL AUX. NEGATIVE OUTPUT)

BROWN (2ND CHANNEL NEGATIVE OUTPUT)

___________________________________________________________________

SWITCH SETTINGS

1 OFF - 3 SECOND DOOR LOCK/UNLOCK

2 OFF - IGNITION AUTO LOCK/UNLOCK OFF

3 0FF - DOOR WILL NOT LOCK IN PASSIVE

4 OFF - ACTIVE ONLY

I also grabbed another remote. A black Verson of the remote displayed above.

Black Remote: 2s4t - 15k601 - aa

Gray: f8ab - 15k601 - aa

Love, Peace, And Chicken Greese

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: September 28, 2004 at 7:39 PM / IP Logged

That is the factory keyless entry or alarm system, it is made by ford. What do u need to know about it.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 28, 2004 at 9:47 PM / IP Logged

That is not the OEM alarm system. I have never seen a OEM system that has the wiring diagram embossed on the back side of the CPU.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

tecca

Member - Posts: 11

Joined: September 22, 2004

Location: United States

Posted: September 29, 2004 at 12:28 AM / IP Logged

Can you guys find some info on the system?

Model #: PEUP-3CH.-PB.V.3

Serial #: 80582

Made in the U.S.A. 12-1995

The system also has a shock sensor with it. I just need to know how to program keypads to match that system. Other than that i can hook it up. When it says "negative pulse" does that mean the negative wire, or something else. I think i know what i means, but not sure how to explain it.

Love, Peace, And Chicken Greese

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.